ICONIC: Fire Flame

formulas

PREPARATION FORMULA 1

base milk_shake® illuminate lightening conditioning oil 40 g

+ milk_shake® decologic total roots lightener 4 g (10%) + milk_shake® oxidizing emulsion 10 vol. (3%) 44 g

PREPARATION FORMULA 2

lengths & ends milk_shake® creative 7.44 – 7CC 40 g

+ milk_shake® illuminate pure pigment copper 8 g (20%) + milk_shake® oxidizing emulsion 20 vol. (6%) 72 g

FORMULA 1

milk_shake® decologic lightening powder 20 g + milk_shake® oxidizing emulsion 20 vol. (6%) 30 g

FORMULA 2

milk_shake® smoothies yellow 30 g + milk_shake® activating emulsion 45 g

STEP 1

To even out the color before applying the Fire flame technique, preparation formula 1 was applied to the base, after which preparation formula 2 was applied to lengths and ends.

STEP 2

On the perimeter of the hair, isolate and block five equidistant triangular sections with the tip pointing upwards. Apply milk_shake® pro color equalizer to equalize and strengthen the hair before coloring, guaranteeing even hair color.

STEP 3

Starting from the rear central area, take the first triangular section and, using a tail comb, separate a small triangle in the centre with the tip pointing downwards. Isolate and block. Using a milk_shake® color board and easy stripes, apply formula 1 over lengths and ends of the two remaining strands. Blend towards the base and isolate using easy stripes.

STEP 4

On the previously isolated triangle, apply formula 1 to the tip and blend upwards. Isolate using easy stripes.

STEP 5

On the following triangle section, using a tail comb, separate a small triangle at the centre with the tip pointing downwards. Isolate and block. Apply formula 1 over lengths and ends of the two strands.

STEP 6

Use the brush vertically to blend close to the base. Isolate using z.one conceptTM easy stripes.

STEP 7

Proceed over the front side using the same technique. Isolate using easy stripes.

STEP 8

Following over the rear right side, separate a small triangle in the centre with the tip pointing downwards. Isolate and block. Using a milk_shake® color board, apply formula 1 with the same technique over lengths and ends of the two remaining strands.

STEP 9

Isolate using z.one conceptTM easy stripes. On the previously isolated triangle, apply the same formula only to the tip. Blend upwards.

STEP 10

Proceed over the following sections on the front side, using the same technique and formula. Isolate each strand using z.one conceptTM easy stripes.

STEP 11

With a horizontal separation, separate the perimeter of the fringe. Insert and block easy stripes under the fringe section. Apply formula 1 freehand over the ends of the fringe area.