ICONIC: Flower Petal

formulas

PREPARATION FORMULA 1

base milk_shake® decologic total roots lightener 40 g + milk_shake® oxidizing emulsion 20 vol. (6%) 40 g

PREPARATION FORMULA 2

lenghts & ends milk_shake® smoothies 10.116 – 10AAR 50 g + milk_shake® activating emulsion 75 g

FORMULA 1

milk_shake® direct colour pink 15 g + milk_shake® direct colour lilac 15 g

STEP 1

To even out the color before applying the Flower petal technique, preparation formula 1 was applied to the base, after which preparation formula 2 was applied to lengths and ends. Apply milk_shake® pro color equalizer to equalize and strengthen the hair before coloring, guaranteeing even hair color.

STEP 2

Separate the perimeter with 4 rounded sections with a width that varies from 3 to 4 cm. Starting from the temple, descend and round off with the tip upwards just behind the ear; descend through the rear side and round off with the tip at the centre of the nape. Repeat on the opposite side. Isolate the rest of the hair.

STEP 3

Starting from the right side, divide the side section vertically in line with the tip traced behind the ear. Starting from the right side, divide the side section vertically in line with the tip traced behind the ear. Divide in half the stand,
horizontally.

STEP 4

Using a milk_shake® color board and z.one conceptTM soft stripes, apply formula 1 over lengths and ends.

STEP 5

Use the brush vertically to blend the color close to the base.

STEP 6

Isolate using z.one conceptTM soft stripes.

STEP 7

Color the above strand using the same technique and formula. Use the brush vertically to blend the color close to the base. Isolate using z.one conceptTM soft stripes.

STEP 8

Divide the rear section in half and horizontally and block the top part. Using a color board and soft stripes, apply formula 1 over lengths and ends of the first strand. Be careful to use the adequate quantity of product to be
deposited on the strand. Use the brush vertically to blend the color close to the base.

STEP 9

Isolate using soft stripes. Proceed over the rear left section, divide the strand in half and block the top part. Apply formula 1 over lengths and ends. Blend the color at the base using the brush vertically. Isolate using soft stripes. Color the above strand using the same technique and formula isolated using soft stripes.

STEP 10

Proceed over the left side, dividing the section in half and horizontally. Block the top part. Using the color board, apply formula 1 over lengths and ends. Blend the color at the base using the brush vertically. Isolate using soft stripes.

STEP 11

Conclude with the last side strand, coloring lengths and ends in the same way and with the same formula.

STEP 12

Isolate using z.one conceptTM soft stripes. Once the processing time has been completed, rinse, cleanse and condition using the most suitable milk_shake® products