Kawaii : Diamond Diffusion Technique

formulas

Preparation formula 1

milk_shake® decologic total roots lightener 30 g, milk_shake® oxidizing emulsion 10 vol. (3%) 30 g.

Preparation formula 2

milk_shake® decologic total roots lightener 30 g, milk_shake® oxidizing emulsion 20 vol. (6%) 30 g.

Preparation formula 3

milk_shake® smoothies semi_permanent color pearl 45 g + 9.1 15 g, milk_shake® activating emulsion 8 vol. (2.4%) 90 g.

FORMULA 1

milk_shake® creative permanent color .17 30 g + .11 10 g, milk_shake® oxidizing emulsion 10 vol (3%) 60 g, milk_shake® color specifics color split 4 g.

FORMULA 2

milk_shake® creative permanent color .1 20 g, milk_shake® oxidizing emulsion 10 vol. (3%) 30 g, milk_shake® color specifics color split 2 g.

FORMULA 3

milk_shake® creative permanent color .7 20 g, milk_shake® oxidizing emulsion 10 vol. (3%) 30 g, milk_shake® color specifics color split 2 g.

FORMULA 4

milk_shake® creative permanent color .6 20 g, milk_shake® oxidizing emulsion 10 vol. (3%) 30 g, milk_shake® color specifics color split 2 g.

step 1

Isolate and block a diamond shape within the internal area with an asymmetrical separation to make it less schematic.

step 2

Separate the rear are centrally and color from roots to ends using formula 1. With vertical separations, proceed with the same formula over the entire rear section.

step 3

Color the entire right side section from roots to ends.

step 4

Proceed with the same technique on the opposite side.

step 5

Isolate the external section using z.one concept™ Easy Stripes.

step 6

Using a tail comb, separate the first strand from the internal area with a maximum width of 1 cm. Apply formula 2 from roots to ends. Color all of the strands of the first layer.

step 7

Separate the second layer in the same way. Apply formula 3 over the entire second layer from roots to ends.

step 8

Apply formula 4 over the third layer from roots to ends.

step 9

Apply formula 3 over the fourth layer from roots to ends.

step 10

Apply formula 2 over the fifth layer from roots to ends.

step 11

Color the last layer from roots to ends, using formula 1.

step 12

The "Diamond Diffusion" technique is created with curved and slim lines and perfectly follows the idea of the hyperbole, where color has a direction and is diffused within each layer, for a soft and elegant blend.