formulas
Preparation formula1
milk_shake® creative conditioning permanent color 12.17 30 g + milk_shake® oxidizing emulsion 40 vol. (12%) 60 g.
FORMULA 2 SHADOW ROOTS
milk_shake® smoothies semi_permanent color 9.13 15 g + milk_shake® smoothies semi_permanent color icy blue 15 g + milk_shake® activating emulsion 30 g + milk_shake® color specific color split 3 g.
FORMULA 3 LENGTHS & ENDS
milk_shake® smoothies semi_permanent color pearl 30 g + milk_shake® activating emulsion 45 g + milk_shake® color specific color split 3 g.
FORMULA 4
milk_shake® smoothies semi_permanent color pearl 10 g + milk_shake® smoothies semi_permanent color pink grapefruit 5 g + milk_shake® smoothies semi_permanent color peach 5 g + milk_shake® light activating emulsion 30 g.
step 1
To even out the color before applying the shadowing technique, the preparation formula 1 was used on the base. Next, formula 2 was applied to the base and formula 3 to lengths and ends.
step 2
After having isolated and blocked a small fringe area, using zig-zag separations, divide the internal area into four sections. Isolate and block with elastics.
step 3
Start from the two back sections. Using a comb, distribute the back right section downwards and to the left, passing over the fixed quadrant. Take a small strand from the bottom left for the anchoring
and, combining this with the section, block with an elastic.
step 4
Distribute the back left section upwards and to the right, passing over the fixed quadrant.
step 5
Take a small strand from the top right for the anchoring, and combining this with the section, block with an elastic.
step 6
Proceed with two front sections. Distribute the front right section downwards and to the left, passing over the fixed quadrant. Take a small strand from the bottom left for the anchoring and, combining this with the section, block with an elastic.
step 7
Proceed on the left front side on the same way. Global view of the sections.
step 8
Begin from the rear left ponytail, divide centrally. Using z.one concept™ soft stripes and milk_shake® color board, apply formula 4 with
a sponge brush over lengths and ends, blending towards the elastic of the ponytail. Proceed with the other half of the ponytail, using the same technique and formula.
step 9
Isolate with soft stripes.
step 10
Proceed with the back right ponytail, divide centrally and block half of it. Using soft stripes and color board, apply formula 4 with a sponge brush over lengths and ends, blending towards the elastic of the ponytail. Complete the pony tail on the same way.
step 11
Proceed over the two front sections with the same technique and apply the same formula. Isolate with soft stripes.
step 12
Final view of the technique. Once the processing time has been completed, rinse, cleanse and condition with products from the milk_shake® range.
